feed all

I have a 64BIT OpenSuSE server I'm looking to migrate over to Ubuntu.Dell 7500 Workstation with Intel E5 Xeon processor64GB of RAM and 20TB of dataMySQL database to migrate over with it.First off before going any further, I noticed the only architecture for 64bit is AMD 64, so does this mean having a Dell server based on Intel, I'm dead in the water as is? If so I can just go towards SME Server, but I would rather try Ubuntu as it's a bit unique on it's own/to try something different.Or is there something unique about the 32bit version that will allow it to use the full 64GB of RAM? This is a domain controller that will also virtualize multiple other servers and other functions. Basically a ...

Greetings,I recently built my first 16.04 server. It has 2 1TB drives in a RAID 1 for /, Boot, Swap, and Primary Data Storage.The boot partitions on both drives is marked as bootable.It has another RAID 1 of 1TB drives for archive data storage.Discoecting any one drive prevents successful boot and drops to initramfs.Ruing dpkg-reconfigure mdadm does not ask about boot degraded. I have tried suggestions on http://askubuntu.com/questions/78995...ot-in-16-04lts without success.I'm hoping someone can assist with setting up both raids to boot degraded as neither RAID will boot but drops into initramfs.Thanks in advance,LeonAdditional detail in case it matters:/proc/mdstat:Personalities : [raid1] ...

All times are GMT +1. The time now is 04:17 AM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

All times are GMT +1. The time now is 08:19 PM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

So I have an HP Mini netbook that was previously used as my main laptop. I have since upgraded to a better system, but my need for it retued as my old server, a Sony VAIO laptop, experienced a hard drive failure. It was old anyways so I decided to use the netbook instead. It didn't have a CD drive so I had to put the ISO for Unbuntu Server (32-Bit) on a flash drive. The installation succeeded, but when it came time to restart to boot for the first time, the laptop would get to the HP splash screen but would hang at this screen. Keyboard input didn't help either. Couldn't change boot settings and couldn't enter BIOS. I took it apart and hooked up the HDD to my desktop computer. The drive spun...

All times are GMT +1. The time now is 11:30 PM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

Hello all!I'm trying to get a Ubuntu Server ruing in Hyper-V on Windows Server 2012 R2, and I can't quite get networking up. The Windows Server 2012 R2 isn't ruing a DHCP server, so I need to use static IPs.When I try to ping the Hyper-V Host, I get Code: xxx@xxxxx:~$ ping [hyper-v ip] coect: Network is unreachable Note that only "lo" shows up when I do a sudo ifconfig, but eth0 shows up with no inet address when i do a sudo ifconfig -a: Code: xxx@xxxxx:~$ sudo ifconfig -a eth0 Link encap:Etheet HWaddr [mac addr] BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0...

All times are GMT +1. The time now is 03:34 PM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

All times are GMT +1. The time now is 05:23 AM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

Hi all,I have been trying to search online but I didn't find any solution to my issue, just to clarify I am using ubuntu server 14.04 for over a year and everything was working fine.I have an intel NUC 2820 with an Intel wifi 7260 card, and I can use only wifi coection no etheet.I did a fresh install of Ubuntu 16.04 in a new SSD, and normally with Ubuntu 14.04 I would setup /etc/network/interfaces like this: Code: # The loopback network interface auto lo iface lo inet loopback #The primary network interface auto wlan0 iface wlan0 inet static address 192.168.11.4 netmask 255.255.255.0 gateway 192.168.1.1 wpa-ssid xxxxx wpa-psk xxxxx dns-nameservers 192.168.1.1 However with 16.04 is not workin...

All times are GMT +1. The time now is 07:44 PM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

I have installed ubuntu server 12.04 from a LiveCD adn it works fine with me. Now I need to upgrade to ubuntu 13.10. It is mentioned that I cant upgrade directly so I have to upgrade to 12.10, then 13.02, then 13.10 (https://help.ubuntu.com/community/UpgradeNotes). In the process of upgrading to 12.10, I am able to "apt-get update, but "do-release-upgrade" yields an error:Checking for a new Ubuntu release Err Upgrade tool signature404 Not Found [IP: 91.189.88.161 80]Err Upgrade tool404 Not Found [IP: 91.189.88.161 80]Fetched 0 B in 0s (0 B/s)WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem.I changed the sources.list an...

All times are GMT +1. The time now is 02:29 AM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

You really should give more info from the start...1. How do you know it's not working, which IP are you trying to access?In VBox, in the VM network settings, did you leave the default NAT option or you set it to bridged?If you use NAT the VM is behind that NAT and it's not easy to access it from your home LAN. That's why I always use bridged and assign static IP from the home LAN subnet to VMs, and they can easily be accessed from any machine in the home network. Let's block ads! بخوانید...

All times are GMT +1. The time now is 02:35 AM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

Hello I need some help on this one. First off, Ubuntu server is NOT installed on my RAID5 array, It is on a separate stand-alone disk. I rebooted my server remotely from work today via SSH and it didn't come back up. When I got home and plugged a monitor into the server I see the following message indicating one of the 4 disks in my RAID5 array has failed and the array is degraded. The problem I have is that I am unable to answer "Y" to go ahead and start the degraded array, so my system won't boot! I need to boot normally so I can see which disk has failed in the array and get a replacement ordered ASAP. I have tried reboot several times but when I get the message:If you abort now, you will...

Hi,I have run into trouble after installing an Ubuntu guest on my Windows 10 host.My laptop: Dell Inspiron 15, 5000 SeriesHost: Windows 10 64-bitGuest: Ubuntu 14.04VirtualBox: 5.1.2The installation of Ubuntu went fine, and I was able to play around a bit, but now I can't boot into Windows or Ubuntu. When I power on my machine, I see the Dell logo, and then a black screen with this message:No bootable devices found.Press F1 key to retry boot.Press F2 key for setup utility.Press F5 Key to run onboard diagnosticsI ran the onboard diagnostics, and it says it passed all the tests.Any help would be appreciated!Thanks! Let's block ads! بخوانید...

Tried fiddling with BIOS setting's, tried making the Bootable USB with different USB creator's, tried re-naming syslinux to isolinux on the USB and vice versa, tried multiple distro's.Once server goes through POST and tries to boot from USB... Constantly get the error message "A Disk Read Error Occurred" and another i have had but can't remember, think it was "Failed To Boot" or something.DSC_0148.jpgFairly sure it's this Motherboardhttp://download.intel.com/support/mo...thol_rev22.pdf Let's block ads! بخوانید...

All times are GMT +1. The time now is 07:53 PM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...

All times are GMT +1. The time now is 09:51 AM.vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd. Ubuntu Logo, Ubuntu and Canonical © Canonical Ltd. Tango Icons © Tango Desktop Project.User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 Inteational License. For details and our forum data attribution, retention and privacy policy, see here Let's block ads! بخوانید...