[all variants] How to increase video ram for skylake graphics?

ساخت وبلاگ

آخرین مطالب

امکانات وب

[all variants] How to increase video ram for skylake graphics?

Hi,

I have a new mainboard Asus B150M-C with an Intel i3 6100 CPU.
It runs very well under Kubuntu Xenial with vdpau disabled and va enabled

The only problem is that there is very little video RAM assigned.
Here's the lspci output:

Code:

00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller]) DeviceName: Onboard IGD Subsystem: ASUSTeK Computer Inc. Skylake Integrated Graphics Flags: bus master, fast devsel, latency 0, IRQ 123 Memory at f6000000 (64-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915
when I try to run

Code:

glxgears -stereo
I get

Code:

"Error: couldn't get an RGB, Double-buffered, Stereo visual"
I'm using a 2650x1440 monitor so some more memory might be a good idea.

In another thread (with another mainboard) I read that the video memory can be set up in the BIOS, but I haven't found anything in the B150M-C BIOS.
ASUS says it can utilize up to 1024 MB shared video RAM but doesn't tell how to set that up.

Any idea?

feed all...
ما را در سایت feed all دنبال می کنید

برچسب : نویسنده : استخدام کار feedoll بازدید : 411 تاريخ : پنجشنبه 11 شهريور 1395 ساعت: 2:03

آرشیو مطالب

پيوندهای روزانه

لینک دوستان

خبرنامه