[ubuntu] Ubuntu 14.04, Samba: Need help coecting to my Windows network and printer

Code:

don-w510-u@don-TP-W510-u:~$ smbtree -d3
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[global]"
WARNING: The "syslog" option is deprecated
added interface wlan0 ip=192.168.1.107 bcast=192.168.1.255 netmask=255.255.255.0
Enter don-w510-u's password: 
tdb(/var/cache/samba/gencache.tdb): tdb_open_ex: could not open file /var/cache/samba/gencache.tdb: Permission denied
resolve_lmhosts: Attempting lmhosts lookup for name TAI<0x1d>
resolve_lmhosts: Attempting lmhosts lookup for name TAI<0x1d>
name_resolve_bcast: Attempting broadcast lookup for name TAI<0x1d>
Got a positive name query response from 192.168.1.107 ( 192.168.1.107 )
Coecting to 192.168.1.107 at port 445
Doing spnego session setup (blob length=74)
got OID=1.3.6.1.4.1.311.2.2.10
got principal=not_defined_in_RFC4178@please_ignore
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schael' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62088215
TAI
resolve_lmhosts: Attempting lmhosts lookup for name TAI<0x1d>
resolve_lmhosts: Attempting lmhosts lookup for name TAI<0x1d>
name_resolve_bcast: Attempting broadcast lookup for name TAI<0x1d>
Got a positive name query response from 192.168.1.107 ( 192.168.1.107 )
Coecting to 192.168.1.107 at port 445
Doing spnego session setup (blob length=74)
got OID=1.3.6.1.4.1.311.2.2.10
got principal=not_defined_in_RFC4178@please_ignore
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62088215
    \PRINTER                
resolve_lmhosts: Attempting lmhosts lookup for name PRINTER<0x20>
resolve_lmhosts: Attempting lmhosts lookup for name PRINTER<0x20>
resolve_wins: WINS server resolution selected and no WINS servers listed.
resolve_hosts: Attempting host lookup for name PRINTER<0x20>
resolve_hosts: getaddrinfo failed for name PRINTER [Name or service not known]
name_resolve_bcast: Attempting broadcast lookup for name PRINTER<0x20>
Got a positive name query response from 192.168.1.104 ( 192.168.1.104 )
Coecting to 192.168.1.104 at port 445
Doing spnego session setup (blob length=0)
server didn't supply a full spnego negprot
Got challenge flags:
Got NTLMSSP neg_flags=0x608a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62088215
SPNEGO login failed: Logon failure
Doing spnego session setup (blob length=0)
server didn't supply a full spnego negprot
Got challenge flags:
Got NTLMSSP neg_flags=0x608a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62008a15
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
        \PRINTERC$                 Default share
        \PRINTERADMIN$             Remote Admin
        \PRINTERDeskJet932c        HP Deskjet 932c
        \PRINTERP2-DATA            
        \PRINTERD                  13G on Printer
        \PRINTERDATA               
        \PRINTERprint$             Printer Drivers
        \PRINTERD$                 Default share
        \PRINTERIPC$               Remote IPC
        \PRINTERp1005              HP LaserJet P1005
    \MICHAELA-PC            
resolve_lmhosts: Attempting lmhosts lookup for name MICHAELA-PC<0x20>
resolve_lmhosts: Attempting lmhosts lookup for name MICHAELA-PC<0x20>
resolve_wins: WINS server resolution selected and no WINS servers listed.
resolve_hosts: Attempting host lookup for name MICHAELA-PC<0x20>
resolve_hosts: getaddrinfo failed for name MICHAELA-PC [Name or service not known]
name_resolve_bcast: Attempting broadcast lookup for name MICHAELA-PC<0x20>
Got a positive name query response from 192.168.1.102 ( 192.168.1.102 )
Coecting to 192.168.1.102 at port 445
Doing spnego session setup (blob length=277)
got OID=1.3.6.1.4.1.311.2.2.30
got OID=1.3.6.1.4.1.311.2.2.10
got principal=<null>
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62088215
        \MICHAELA-PCUsers              
        \MICHAELA-PCIPC$               Remote IPC
        \MICHAELA-PCData               
        \MICHAELA-PCC$                 Default share
        \MICHAELA-PCADMIN$             Remote Admin
    \KARINA                 Karina's computer
resolve_lmhosts: Attempting lmhosts lookup for name KARINA<0x20>
resolve_lmhosts: Attempting lmhosts lookup for name KARINA<0x20>
resolve_wins: WINS server resolution selected and no WINS servers listed.
resolve_hosts: Attempting host lookup for name KARINA<0x20>
resolve_hosts: getaddrinfo failed for name KARINA [Name or service not known]
name_resolve_bcast: Attempting broadcast lookup for name KARINA<0x20>
    \DON-TP-W510-U          don-TP-W510-u server (Samba, Ubuntu)
resolve_lmhosts: Attempting lmhosts lookup for name DON-TP-W510-U<0x20>
resolve_lmhosts: Attempting lmhosts lookup for name DON-TP-W510-U<0x20>
resolve_wins: WINS server resolution selected and no WINS servers listed.
resolve_hosts: Attempting host lookup for name DON-TP-W510-U<0x20>
Coecting to 127.0.1.1 at port 445
Doing spnego session setup (blob length=74)
got OID=1.3.6.1.4.1.311.2.2.10
got principal=not_defined_in_RFC4178@please_ignore
Got challenge flags:
Got NTLMSSP neg_flags=0x628a8215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62088215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62088215
        \DON-TP-W510-UHP-Deskjet-932c    HP Deskjet 932c
        \DON-TP-W510-UHP-LaserJet-P1005    HP LaserJet P1005
        \DON-TP-W510-UIPC$               IPC Service (don-TP-W510-u server (Samba, Ubuntu))
  \DON-TP-W510-Uprint$             Printer Drivers

Code:

don-w510-u@don-TP-W510-u:~$ smbclient -L 192.168.1.104
WARNING: The "syslog" option is deprecated
Enter don-w510-u's password: 
session setup failed: NT_STATUS_LOGON_FAILURE
don-w510-u@don-TP-W510-u:~$

Code:

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = tai

# server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)

# Windows Inteet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option caot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that coects
    log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
    max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
    syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Ruing as "active directory domain controller" will require first
# ruing "samba-tool domain provision" to wipe databases and create a
# new domain.
    server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;    passdb backend = tdbsam

    obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
    unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Entersnews*spassword:* % *Retypesnews*spassword:* % *passwordsupdatedssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
    pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous coections
    map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \%Nprofiles%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \%N%Uprofile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \%N%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is coecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;    usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
    usershare allow guests = yes
    useame map = /etc/samba/smbusers
#    security = domain
    security = user
;    encrypt passwords = yes
;    guest ok = no
;    guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \serveruseame
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \serveruseame shares can be coected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "useame"
# can coect to \serveruseame
# This might need tweaking when using exteal authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
;    guest ok = no
;    read only = yes
    create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
;    browseable = yes
;    read only = yes
;    guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin