[ubuntu] RX packets errors only on port forward Ethernet.

Just don't get why this is. I got Ubuntu 16.04 server and have two USB to Gigabit Etheet. I have one port foreword so I can get to it on the web. But it gets RX packets dropped errors. It does seem to work good but the errors add up and I like to fix this. I never seen it on a 10/100 but on the 1000 I see it and I switch a lot of Gigabit Etheet cables and it don't fix it.

Because I have 2 Gigabit ports. I can edit the /etc/networks/interfaces file and switch then. So the port foreword one is the static and the other one to dynamic. Were it auto gets a IP. When ether one is is dynamic they don't get errors but when I just switch them in the interfaces file then the one I have static starts to get errors.

I guess it's some setting I my have not sure.

It's the same hardware when I switch it so that can't be it. I guess it's some setting I have.

Here is what my interfaces file looks like now if this helps:

# interfaces(5) file used by ifup(8) and ifdown(8)

#J5 Create USB-C hub = enx0050b619c659
#Ableco USB-C hub = enx00051ba6b8ff

auto lo enx00051ba6b8ff enx0050b619c659
iface lo inet loopback

#iface enx00051ba6b8ff inet static
iface enx0050b619c659 inet static
        address 192.168.2.109
        netmask 255.255.255.0
        broadcast 192.168.2.255
        network 192.168.2.0
        gateway 192.168.2.1
        dns-nameservers 127.0.1.1 8.8.8.8 8.8.4.4
        dns-domain hsd1.mi.comcast.net

-Raymond Day