[ubuntu] IR Remote doesn't work at all.

I have a mceusb IR receiver that works on Windows, but not on my Ubuntu server/Kodi box.

I'm ruing Ubuntu 14.04, using keel 3.13.0-85-generic, and Kodi 16.1

Neither irw nor ir-keytable retu any values when I press any remote buttons. The little red light on my reciever lights up, so I know it's seeing the button presses.

From dmesg:

Code:

[11108.332521] usb 3-2: new full-speed USB device number 4 using xhci_hcd
[11108.350613] usb 3-2: New USB device found, idVendor=0471, idProduct=0815
[11108.350622] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11108.350626] usb 3-2: Product: eHome Infrared Transceiver
[11108.350630] usb 3-2: Manufacturer: Philips
[11108.350634] usb 3-2: SerialNumber: PH00Z6cz
[11108.351935] Registered IR keymap rc-rc6-mce
[11108.352165] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/rc/rc1/input13
[11108.352304] rc1: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/rc/rc1
[11108.352542] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input14
[11108.352907] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[11108.528840] mceusb 3-2:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[11108.528850] mceusb 3-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)

From lsusb:

Code:

Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 004: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

From ir-keytable:

Code:

Found /sys/class/rc/rc1/ (/dev/input/event2) with:
        Driver mceusb, table rc-rc6-mce
        Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
        Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
        Name: Media Center Ed. eHome Infrared
        bus: 3, vendor/product: 0471:0815, version: 0x0000
        Repeat delay = 500 ms, repeat period = 125 ms

It appears that the receiver is being seen and recognized, but it's completely ignoring its input. By looking at my outputs above, is there anything I'm missing that would explain this? I would really like to get this to work, as presently I'm using a wireless keyboard to control Kodi, and that's rather awkward.

Let me know if you need output from anything else.

برچسب: نویسنده: استخدام کار تاريخ: پنجشنبه 23 ارديبهشت 1395 ساعت: 7:59

درباره سایت

آخرین مطالب

امکانات وب

[ubuntu] IR Remote doesn't work at all.

صفحه بندی

آرشیو مطالب

پيوندهای روزانه

لینک دوستان

خبرنامه