feed all
درباره سایت
آخرین مطالب
- The coffees are on me. No! you caot have a muffin...
- Can't write
- Updating to 16.04 doesn't seem to have gone as plaed.
- [ubuntu] Networking problemsProblem with apt-get
- [UbuntuGnome] Problems displaying boot screen and tty's, GUI is fine
- Grub not working now, after working for a week.
- Free and easy Andoid emulator
- [server] Not starting NFS kernel daemon: no support in current kernel.
- [lubuntu] Japanese input not working
- Migrating from OpenSuSE Server to Ubuntu Server, tons of questions
امکانات وب
I had neglected my server for a very long, just leaving it ruing without monitoring it. Installed webmin last night and saw one of my drives had Errors Logged: 65357
Ran a test on the drive:
Code:
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-25-generic] (local build)Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Weste Digital Red (AF) Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WCC1T1134740 LU WWN Device Id: 5 0014ee 25df214a5 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Apr 7 22:25:01 2016 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40500) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 406) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 170 021 Pre-fail Always - 6166 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 698 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4345 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 697 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 684 194 Temperature_Celsius 0x0022 113 104 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 65357 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 65357 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 40 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 01 00 00 00 40 00 02:52:46.536 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:45.523 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:44.510 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:43.497 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:42.484 READ SECTOR(S) Error 65356 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 40 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 01 00 00 00 40 00 02:52:45.523 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:44.510 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:43.497 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:42.484 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:41.471 READ SECTOR(S) Error 65355 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 40 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 01 00 00 00 40 00 02:52:44.510 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:43.497 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:42.484 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:41.471 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:40.458 READ SECTOR(S) Error 65354 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 40 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 01 00 00 00 40 00 02:52:43.497 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:42.484 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:41.471 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:40.458 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:39.445 READ SECTOR(S) Error 65353 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 40 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 01 00 00 00 40 00 02:52:42.484 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:41.471 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:40.458 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:39.445 READ SECTOR(S) 20 00 01 00 00 00 40 00 02:52:38.432 READ SECTOR(S) SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4345 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scaing selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
It seemed to have passed, but it has these errors and I don't know what they mean:
Code:
04 61 01 00 00 00 40 Device Fault; Error: ABRT at LBA = 0x00000000 = 0
2) The drive is still in warranty should I retu it to WD?
Any help appreciated.
برچسب:
نویسنده: استخدام کار